You're currently on:
Specifications:
-
Based on the EM100 Ethernet module.
-
10BaseT Ethernet port.
-
DS100R: one RS232 serial port(TX, RX, RTS, CTS lines).
-
DS100B: universal RS232/422/485 port:
-
RS232 mode: RX, TX, RTS, CTS, DTR, DSR lines;
-
RS422: RX+/-, TX+/-, CTS+/-, RTS+/- lines;
-
RS485: RX+/-, TX+/-, automatic direction control.
-
-
Four status LEDs.
-
Power: 9-16V (12V nominal).
-
Dimensions: 89*51*30mm.
-
Firmware is upgradeable through the serial port or network.
Serial-over-IP firmware:
-
Full- and half-duplex serial port modes.
-
Server, client, and server/client network ("routing") modes.
-
Numerous other options for connections, serial port, etc.
-
Configuration stored in the EEPROM.
-
Detailed status indication via LEDs.
-
Setup through the serial port or network (UDP).
-
Remote control of RTS, CTS, DTR, and DSR lines.
-
"On-the-fly" commands for immediate serial port configuration.
-
Serial-side "modem" commands for network connections control.
-
Direct control of ADSL modems.
-
Supports UDP, TCP, ARP, ICMP (ping), DHCP, PPPoE, LCP.
