Controllo accessi/ lavoro

I sistemi per il controllo degli accessi ed il tempo lavorativo gestiscono il regime entrate/uscite attraverso alte tecnologie per l’autorizzazione – RFID e biometria. I Sistemi non solo registrano gli eventi, ma prendono decisioni in tempo reale. Tutto questo da la possibilità per la definizione di regole per l’accesso a determinate aree (per una persona singola, un gruppo di persone, ecc.). Il controllo automatizzato non necessita la presenza e il controllo fisico alle entrate/uscite delle aree e permette completo controllo e completa statistica sulle presenze/assenze del personale, il tempo lavorativo, l’inizio e la fine del giorno lavorativo.

iCON110 Controller for access control and Time and attendance

Da: 79,04 €

A: 239,20 €

iCON110 Intelligent controller for access control and Time and attendance for up to 2 doors Approfondisci

Aggiungi al Confronto

iCON115 Controller for access control and time attendance with built in security system function

Da: 111,28 €

A: 250,12 €

iCON115 Intelligent access control and work time controller with built in security system function Approfondisci

Aggiungi al Confronto

iCON130 Controller for access control, time and attendance and automation

Da: 145,60 €

A: 284,44 €

Intelligent Multifunctional controller, which combines access control and automation system in one universal device. This specially designed controller supports control of up to 4 doors with access control, 1-W port for communicating with DALLAS 1-W devices (optional : i-buttons, temperature and RH sensors, A/D convertors and so on....). Designed for buildings and premises with hi security level. Supports local and global antipassback function. Approfondisci

Aggiungi al Confronto

Fingerprint terminal for Access control and Time attendance management with build-in RFID reader SF300

183,03 €

The SF300 is an IP based fingerprint terminal, which operate in both network mode and standalone mode. Wiegand output makes SF300 flexible to connect with controllers as a slave reader, Additionally, wiegand input allows two units of SF300 to configure with each other and utilize Master & Slave solution, which requires user verification at both entrance and exit. Meanwhile, anti-passback function can be used to maximize the security. Auxiliary input interface allows SF300 to connect with an external source, for instance, a smoke detector or emergency switch. Once the linkage function is enabled through the machine menu, the device would generate an alarm signal and open the door in case of emergency. Approfondisci

Aggiungi al Confronto

iCON180 Controller for access control, alarm system and automation

Da: 187,20 €

A: 347,36 €

iCON180 Controller for access control, alarm system and automation - 4 doors onesided; 3 doors- 1х dualsided and 2х onesided; 2 doors dualsided Approfondisci