You're currently on:
iCON110R RS285 controller has the ability to manage up to 512 relays, positioned on external relay-operated reamers. It has standardised inputs for two readers, which have the ability to work in a card mode, PIN code, card + work code.
Regarding the handling of the system – the controllers work in serial RS485 communication mode (when it can find and connect to bus bar with up to 253 devices from the iCON1XX series).
Every change in the settings could be realised by paid software (Andromeda Pro) or a free one (Andromeda Tool). Both softwares contribute to the use of additional functions described in the software’s functionality.
Possible controller’s configurations:
- Both readers manage 32 relays
- Each reader manages 16 relays (2x 16 relays)
- Both readers manage 512 relays
- If configuration 1 or configuration 2 is active, rights for more than one relay could be given to every single card. If configuration 3 is active, every card manages only one relay.
- Ability for mains communication through RS485 (up to 253 devices)
- Management of up to 32 relay-operated outputs-3A/48VDC or up to 512 relay-operated outputs-3A/48VDC
- Ability for management of paid services with Andromeda Pro software – parking lot, fitness, spa, etc.
- Ability for connection with Fire Alarming Station with fire entry (NO stud)
- Supports user requested settings of the entrances
- Non-volatile memory and watch
Inputs 2x readers 26 or 34 bit WIEGAND (determined automatically) and 4-8 bit figures for PIN, (1x Entry for emergency situation)
Outputs Up to 32 relay-operated outputs-3A/48VDC or up to 512 relay-operated outputs-3A/48VDC situated on external reamer modules
|Input ports||2х четци 26 или 34 bit WIEGAND (определя се автоматично) и 4-8 bit цифри за ПИН, (1x Вход за аварийна ситуация)|
|Outputs ports||До 32 релейни изхода-3A/48VDC или до 512 Релейни изхода-3A/48VDC, разположени на външни разширителни модули|
|Voltage||Входящо напрежение: 12 VDC|
|Operating humidity(RH)||0% - 90% (non-condensing)|