Şu an buradasınız :

SBR-01CR

Diğer Görünümler

13.56MHz Standalone Proximity / PIN Controller for Access control SBR-01CR/MFR

Stok Durumu : Stokta var

160,65 ₺
Sepete Ekle

Bu ürünü ilk yorumlayan siz olun

Hızlı Gözat

Suitable for door access not only for small shops and domestic households but also for commercial and industrial applications such as factories, warehouses, laboratories, banks and prisons.



SBR-01CR/MFR is a single door standalone access controller or a Wiegand output 26 bit keypad or card reader. Supports up to 2000 users in either a Card, 4~8 digits PIN, or a Card + PIN option. The inbuilt card reader supports 13.56 MHz frequency cards/tags. cards/tags. It is suitable for mounting either indoor or outdoor in harsh environments. It is housed in a strong, sturdy and vandal proof Zinc Alloy electroplated case.The electronics are fully potted so SBR-01CR/MFR is waterproof and conforms to IP68.

Features:

  • Full programming from the keypad
  • 2,000 users, supports Card, PIN
  • Can be used as a stand alone keypad, Pin length 4~8 digits
  • Can be used as a 13.56 MHz Reader
  • Backlight keypad
  • Wiegand 26 bit input and output
  • One programmable Relay output, NO, NC, COM
  • Adjustable Door Output time, Alarm time, Door Open time
  • Block enrollment, can enroll maximum 2000 consecutive card within 2 minutes
  • Easy to install and program
  • Built in light dependent resistor (LDR) for anti tamper
  • Built in buzzer
  • Red, Yellow and Green LEDs display the working status 
User capacity 2 000
Transaction capacity -
Identification type Card identification, PIN
RFID technology 13.56 MHz
Input ports 1ea (Exit button,26 bit Wiegand input)
Output ports 2ea (Locking device, Alarm)
Communication Wiegand 26 bit-input, Wiegand 26 bit-output
Voltage 12 VDC
Current (mA) ~ 80
LED indicator Yes
Beeper Yes
Operating temperature -20℃~60℃
Operating humidity(RH) 5%~ 95% RH
Dimension (mm) 135 * 58 * 26
Certification CE, IP68
Warranty (Years) 2
Software No
İndirmeler Hayır
Etiketlerinizi Ekleyin :
Etiketleri ayırmak için boşluk kullanınız. Deyim tipindeki etiketler için tekli tırnak (') kullanınız.