Şu an buradasınız :

Converter RS 232/422/485 to Ethernet

Converter RS 232/422/485 to Ethernet

Stok Durumu : Stokta yok

371,25 ₺

Bu ürünü ilk yorumlayan siz olun

Hızlı Gözat

The DS100 is Tibbo's original device server (serial-to-Ethernet converter). The DS100 externally connects virtually any existing serial device to an Ethernet network.

 



Specifications:

  • Based on the EM100 Ethernet module.

  • 10BaseT Ethernet port.

  • DS100R: one RS232 serial port(TX, RX, RTS, CTS lines).

  • DS100B: universal RS232/422/485 port:

    • RS232 mode: RX, TX, RTS, CTS, DTR, DSR lines;

    • RS422: RX+/-, TX+/-, CTS+/-, RTS+/- lines;

    • RS485: RX+/-, TX+/-, automatic direction control.

  • Four status LEDs.

  • Power: 9-16V (12V nominal).

  • Dimensions: 89*51*30mm.

  • Firmware is upgradeable through the serial port or network.

 

Serial-over-IP firmware:

  • Full- and half-duplex serial port modes.

  • Server, client, and server/client network ("routing") modes.

  • Numerous other options for connections, serial port, etc.

  • Configuration stored in the EEPROM.

  • Detailed status indication via LEDs.

  • Setup through the serial port or network (UDP).

  • Remote control of RTS, CTS, DTR, and DSR lines.

  • "On-the-fly" commands for immediate serial port configuration.

  • Serial-side "modem" commands for network connections control.

  • Direct control of ADSL modems.

  • Supports UDP, TCP, ARP, ICMP (ping), DHCP, PPPoE, LCP.

Voltage 9-16V (12V nominal)
Seçenekler Yok
Ports 10BaseT Ethernet; one RS232 serial port(TX, RX, RTS, CTS lines); universal RS232/422/485 port
Working mode RS-485 to LAN; RS-422 to LAN; RS-232 to LAN
Switching modes Manual through jumpers
LED indicator 4-colour LED
Warranty (Years) 2
Software Free
Etiketlerinizi Ekleyin :
Etiketleri ayırmak için boşluk kullanınız. Deyim tipindeki etiketler için tekli tırnak (') kullanınız.