You're currently on:
iCON115 controller has the ability to manage one door two-sidedly or one door unilaterally. In addition to this it can recognise up to 2 sensors for alarming system + individual input for magnetic stud. It has standardised inputs for two readers, which have the ability to work in card mode, PIN code, card + work code, biometric readers or combinations of the above-mentioned. The security function gives you the convenience to use the access control system and the alarming system combined in only one unit. It is not necessary for you to have a separate keyboard for activating and deactivating. This function is carried out by the access control reader which “reads” the ID of the user (RFID, PIN, etc.).
The alarm can be used only by users who do have the rights for turning it on/off, independently of having the right of access to the corresponding room. E. g. if a user (who has the right of access to the room, but has not right for signal security system (activation/deactivation) tries to enter (when sygnal security is activated) – access to the room will be restricted.
Regarding the handling of the system, the controller works in two modes – autonomous or with serial/LAN communication (depends on the added module).
When the autonomous mode is on, the adding and the deleting of cards is to be made by Master card which should be initially activated by user’s software. In communication mode you have the ability to add the controller into serial RS485 bus bar or you could use the convenient additional modules (USB or LAN) with which the controller may be used in autonomous mode or it can be used for converting USB or LAN in RS485 to other controllers, connected in a common communication bus bar.
Every change in the settings could be realised by paid software (Andromeda Pro) or a free one (Andromeda Tool). Both softwares contribute to the use of additional functions described in the software’s functionality.
- Ability for independent operation with Master card
- Ability for mains communication (up to 253 devices)
- Ability for USB/LAN communication through additional module
- Built Alarming system function (one hardware zone)
- Ability for measuring work time with Andromeda Pro
- Automatic actuation of the exits by preliminary set time-graph
- Supports time-graphs for limitation of the access
- Supports user requested settings of the entrances and the exits
- Non-volatile memory and watch
- Ability of managing turnstile with the antipassback function
You may also be interested in the following product(s)
|Input ports||1x Alarm zone(ATZ), 2х readers 26 or 34 bit WIEGAND (determined automatically) and 4-8 bit for PIN, 5ea (2x exit button, 2 x Magniten contact , Emergency login )|
|Outputs ports||4ea (2 OC output-30V/0.5A, 2x relay output (125V/3A) , 1x Output 13,7VDC battery protection from deep discharge|
|Communication||RS 485, Wiegand 26 bit, Wiegand 34 bit|
|Voltage||Input voltage: 17-30 VDC, 16-24 VAC|
|Operating humidity(RH)||0% - 90% (non-condensing)|
|Downloads||Free software Andromeda.zip
Module for remote maintenance.exe
Brief instruction for use Andromeda Tool.pdf
User manual and connection wire.pdf
Short presentation Andromeda PRO - google docs