You're currently on:

SBR-01CR

Mehr Ansichten

125kHz ASK(EM) Standalone Proximity / PIN Controller for Access control SBR-01CR

Verfügbarkeit: auf Lager

55,64 €
Add Items to Cart

Bewerten Sie dieses Produkt als Erster

Schnellübersicht

Suitable for door access not only for small shops and domestic households but also for commercial and industrial applications such as factories, warehouses, laboratories, banks and prisons.



SBR-01CR is a single door standalone access controller or a Wiegand output 26 bit keypad or card reader. Supports up to 2000 users in either a Card, 4~8 digits PIN, or a Card + PIN option. The inbuilt card reader supports 125kHz ASK(EM) frequency cards/tags. cards/tags. It is suitable for mounting either indoor or outdoor in harsh environments. It is housed in a strong, sturdy and vandal proof Zinc Alloy electroplated case.The electronics are fully potted so SBR-01CR is waterproof and conforms to IP68.

Features:

  • Full programming from the keypad
  • 2,000 users, supports Card, PIN
  • Can be used as a stand alone keypad, Pin length 4~8 digits
  • Can be used as a 125 kHz Reader
  • Backlight keypad
  • Wiegand 26 bit input and output
  • One programmable Relay output, NO, NC, COM
  • Adjustable Door Output time, Alarm time, Door Open time
  • Block enrollment, can enroll maximum 2000 consecutive card within 2 minutes
  • Easy to install and program
  • Built in light dependent resistor (LDR) for anti tamper
  • Built in buzzer
  • Red, Yellow and Green LEDs display the working status 
User capacity 2 000
Transaction capacity -
Identification type Card identification, PIN
RFID Technologie 125 kHz ASK(EM)
Input ports 1ea (Exit button,26 bit Wiegand input)
Output ports 2ea (Locking device, Alarm)
Communication Wiegand 26 bit-input, Wiegand 26 bit-output
Voltage 12 VDC
Current (mA) ~ 80
LED indicator Yes
Beeper Yes
Operating temperature -20℃~60℃
Operating humidity(RH) 5%~ 95% RH
Dimension (mm) 135 * 58 * 26
Certification CE, IP68
Warranty (Years) 2
Software No
Downloads Nein
Fügen Sie Ihre Tags hinzu:
Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.